9: Electronic Product Testing & Certifications

Titoma > Our Service > 9: Electronic Product Testing & Certifications
Titoma HWW

Electronic product testing of Electronic Devices

The pilot run products are subjected to a battery of tests during our electronic product testing phase, such as:

  • accelerated aging,
  • temperature shocks in our heat chamber,
  • drop tests with and without packaging,
  • water and& dust ingression tests to meet for example the IP67 standard.
  • or other relevant tests

But with all the testing we do in our labs, nothing can replace solid field testing, by real users in the actual target market, so we always ask our clients not to ignore this important step.


We obtain all the necessary certifications for you

In February 2017 a lot of the CE rules became more stringent and since then the number of rides back and forth to the certifying lab increased quite a bit! Fortunately, it is only a 5-minute drive from the office. We develop products to be compliant with:

  • FCC (Federal Communications Commission)
  • CE (European Conformity)
  • UL (Underwriters Laboratories)
  • ROHS (Restriction of Hazardous Substances Directive)
  • FDA (Food and Drug Administration)
  • WEEE (Waste Electrical and Electronic Equipment)
  • CCC (China Compulsory Certificate)



Discuss your situation confidentially and get a quotation from us.


Navigate to the Design to China Manufacturing steps that you wish to learn more about

  • Product Architecture

    Titoma HWW Architecture

    We work closely with your team to define the user and functional requirements of the new product, and we determine the key technological challenges. Next our China sourcing team evaluates the full spectrum of costs effective components available, in China and elsewhere, so we can..Read More

  • Industrial Product Design

    Titoma HWW Industrial Design

    Industrial design, the look and feel, is a key factor in the commercial success of your product and every design starts with end-user research; who are your users, how will they use your product, what are the key benefits they are looking for, and what..Read More

  • Mechanical Engineering

    Mechanical Design For China Manufacturing

    The job of our mechanical engineers is to realize the original ID design intent as faithfully as possible, while meeting a host of other requirements as well. Our mechanical engineering team not only optimizes the design of every plastic and metal part for robustness and..Read More

  • Electronic Engineering

    Titoma HWW Electronic Design

    Titoma’s electronic engineers have been designing and manufacturing electronic products in Asia since 2003. We have the in-house skills and experience to develop embedded solutions, IoT Devices and Industrial Equipment and we are a Preferred Microchip Design Partner:…  

  • Embedded System Firmware Design

    Titoma HWW Firmware Design

  • Electronic Prototyping

    Titoma HWW Prototyping

    During the development we produce several prototypes, often first a partial electronic prototype to compare key components. Then a few iterations of complete working prototypes. For reasons of IP protection and speed we do our prototyping in-house, the housings 3D printed and the electronic circuits often hand-soldered...Read More

  • Injection Mold Making

    Titoma HWW Molds

    Once the shape of the plastic and metal parts is frozen we make the steel molds used to mass produce the housing and other parts. Our Taiwanese mechanical engineers discuss the mold drawings with the Chinese mold makers to assure both the robustness and the..Read More

  • Pilot Production Run

    Totoma HWW Pilot Run

    While earlier prototypes have been carefully assembled by our engineers, the test is now if we can replicate the same quality in mass production, and so for a pilot to be valid it needs to be done on the same assembly line by the same..Read More

  • Testing & Certifications

    Titoma HWW

    The pilot run product are subjected to a battery of test, such as accelerated aging, temperature shocks in our heat chamber, drop tests with and without packaging, water & dust ingression tests to meet for example the IP67 standard. But with all the testing we..Read More

  • Mass Manufacturing in China

    Titoma HWW Mass Manufacturing

    Design For Manufacturing (DFM) it is not something that can be done as an afterthought when a design is 95% ready, for us Design For China Manufacturing drives our design process right from the start, beginning with the electronic product architecture.